- High operating efficiency
- Dynamically balanced rotating parts ensures minimum vibration and longer life
- Extremely tough & hard wearing lubricated journal bearings are used
- Designed for wide voltage fluctuations
- Better efficiency and consistent performance
- Motor portion covered with corrosive resistance stainless steel (SS 304) shell
- Specially designed high performance thrust bearing(SS 420 with Graphite Carbon) to withstand high axial thrust load
- SS 410 impellers and hard chrome SS sleeves are used to increase the life of the pump
| SPECIFICATIONS | 150mm / 175mm |
|---|---|
| Power Range | 4.5 kW - 15 kW (6HP - 20HP) |
| Voltage Range | Three phase 380 - 415V, 50Hz AC Supply |
| Maximum Total Head | 101 metre |
| Maximum Flow Rate | 31 lps (111.6 m3/h) |
| SPECIFICATIONS | 150mm / 200mmm |
|---|---|
| Power Range | 5.5 kW - 18.5 kW (7.5HP - 25HP) |
| Voltage Range | Three phase 380 - 415V, 50Hz AC Supply |
| Maximum Total Head | 88 metre |
| Maximum Flow Rate | 33.33 lps (120 m³/h) |
| SPECIFICATIONS | 200mm / 250mm |
|---|---|
| Power Range | 30 kW - 75 kW (40HP - 100HP) |
| Voltage Range | Three phase 380 - 415V, 50Hz AC Supply |
| Maximum Total Head | 162 metre |
| Maximum Flow Rate | 60 lps (216 m³/h) |
Material of Construction
| Part Name | 175mm Pump |
|---|---|
| Pump Shaft | SS 410/ SS 431 |
| Impeller | SS 410 |
| Diffuser Chamber | Cast Iron |
| Upper and Lower Housing | Cast iron |
| Shaft | SS 410 & EN 9 with 304 |
| Part Name | 200mm Pump |
|---|---|
| Check Valve Seat | SG iron |
| Impeller | SS 410 |
| Diffuser Chamber | Cast Iron |
| Upper and Lower Housing | Cast iron |
| Shaft | EN 8 with SS-410/431 sleeve at bush guide |
| Part Name | 250mm Pump |
|---|---|
| Check Valve Seat | Nitrile Butyl Rubber / SG iron |
| Impeller | LTB 2 & SS 410 |
| Diffuser Chamber | Cast Iron |
| Upper and Lower Housing | Cast iron |
| Coupling | SS 410/SS 431 |